General Purpose Archives - Quantel

General Purpose

Brand

PRS-300 PRECISION PROGRAMMABLE RESISTANCE DECADE

Resistance Range: 0.1 Ω to 20 MΩ
Precision Lab Grade Accuracy 70 ppm + 1 mΩ
Resolution: 1 μΩ ( 0.000 001 Ω) or 6 digits
To further improve accuracy to <20 ppm, for no additional cost, see the PRS-DMM
Programmable resistor with USB interface and Labview drivers
5 year warranty

HPRS-HIPOT-LOAD (FLUKE 5320A-LOAD HIPOT REPLACEMENT) HIPOT CURRENT CALIBRATION LOAD RESISTORS

8 Resistances from 10 kΩ to 5 MΩ standard
Standard accuracy: ±10% at 23°C
Power rating : up to 300 W at 100 kΩ
Voltage rating: 1,400 to 5,500 V depending upon resistance value
Continuous operation at rated power
Kel-F washers on all terminals for low leakage current and high dielectric strength
Custom values available for AR and QuadTech/Chroma hipot testers

ESI RS925D RESISTANCE DECADE

High accuracy – 20 ppm + 0.5 mΩ
High stability – 20 ppm + 0.5 mΩ
Resistance from 10 mΩ to 1.1 MΩ
20 μΩ resolution
Precise fixed minimum resistance
Hermetically sealed, low inductance resistors
The first 4 decades can be individually trimmed for increase accuracy

ESI / TEGAM DB62 DECADE RESISTOR

Precision accuracy of ±(0.01% + 2 mΩ)
Resistance range from 0.01 Ω to 11.1111 MΩ
4 models available, each covering six decades
High-performance solid silver-alloy contacts
Low zero resistance < 6mΩ

ESI SR1050 SERIES 1M & 10 M RESISTANCE TRANSFER STANDARD

Resistance Values 1 MΩ & 10 MΩ
Initial Accuracy… ± 25 or 30 ppm of nominal value matched within 10 ppm
Transfer Accuracy… ± 2 ppm (Typical Short-term Repeatability)
Calibration Accuracy… ± 10 or 15 ppm

ESI SR1010 RESISTANCE TRANSFER STANDARD

Resistance Transfer Standards available in the following values 1 Ω, 10 Ω, 100 Ω, 1 kΩ, 10 kΩ, 100 kΩ
Initial Accuracy… ± 20PPM of nominal value matched within 10PPM
Transfer Accuracy… ± (1PPM + 0.1uΩ at parallel value) for 100:1
Transfer Accuracy… ± (1PPM + 1uΩ at series parallel value) for 10:1
Long Term Accuracy… ± 50PPM of nominal value
Calibration Accuracy… ± 10PPM

PRS-200 SERIES PROGRAMMABLE RESISTANCE DECADE BOX

IEEE, RS232 or Ethernet Programmable Decade Resistor
Wide range and resolution: 100 mΩ to 100 M&Omega with 1 mΩ resolution
Available at accuracies of : 0.01%, 0.02%, 0.05%, 0.1%, 0.5%, and 1%
Special RTD and custom configurations
Dual / Combo rackmount models ( examples: Resistance & Capacitance or Resistance & Inductance)

ESI SR1030 SERIES OIL IMMERSED TRANSFER STANDARD

Resistance Values of 1 Ω – 100 kΩ
Initial Accuracy… ± 20 PPM of nominal value matched within 10 PPM
Transfer Accuracy… ± (1 PPM + 0.1uΩ at parallel value) for 100:1
Long Term Accuracy… ± 50 PPM of nominal value
Calibration Accuracy… ± 10 PPM

RTD SERIES – PRECISION RTD SIMULATOR

Highest accuracy, highest stability, lowest TC of any RTD Simulator available
Accuracy for Z Series: 0.005% (0.012 ºC for PT 100)
Resolution: 1 mΩ (0.0025 ºC for PT 100)
Stability 0.0002% for 24 hours; 0.001% for 12 months

1
2
3
4