HPRS-HIPOT-LOAD (FLUKE 5320A-LOAD HIPOT REPLACEMENT) HIPOT CURRENT CALIBRATION LOAD RESISTORS

Add to Enquiry
Data Sheet

Key Features

  • 8 Resistances from 10 kΩ to 5 MΩ standard
  • Standard accuracy: ±10% at 23°C
  • Power rating : up to 300 W at 100 kΩ
  • Voltage rating: 1,400 to 5,500 V depending upon resistance value
  • Continuous operation at rated power
  • Kel-F washers on all terminals for low leakage current and high dielectric strength
  • Custom values available for AR and QuadTech/Chroma hipot testers

Description

The IET HPRS-Hipot-Load is an excellent replacement for the Fluke 5320A-Load Hipot current calibration load resistors. Various versions available: HPRS-HIPOT-QuadTech G1030 HPRS-HIPOT-Associated Research HPRS-HIPOT-Phillips-2kV The IET high power resistive load can be used with the Fluke 5320A Multifunction Electrical Tester Calibrator or standalone. It provides a high power and high voltage load to various hipot tester to create the leakage current needed to calibrate various manufactures hipot testers.

The HPRS-HIPOT-LOAD consist of a series of 8 resistances from 10 kΩ to 5 MΩ. The resistances are in series between the Lo and the 5 MΩ terminals with taps connected to the other resistance values.

The 8 resistance values were chosen to mimic the Fluke 5320A-load. IET can build the HPRS Hipot Load with a range of resistance values, accuracies, power ratings and maximum voltage depending upon your requirement.

Typical Application: The hipot tester is connected to the various calibration load resistors during the calibration process. The voltage across the load and the current flowing through the load can then be measured. The measured voltage and current can then be compared with the displayed value from the hipot tester during calibration or as part of the adjustment procedure.

Custom versions for calibration of Associated Research and QuadTech/Chroma hipot testers are available.

Related Products

PRS-300 PRECISION PROGRAMMABLE RESISTANCE DECADE

  • Resistance Range: 0.1 Ω to 20 MΩ
  • Precision Lab Grade Accuracy 70 ppm + 1 mΩ
  • Resolution: 1 μΩ ( 0.000 001 Ω) or 6 digits
  • To further improve accuracy to <20 ppm, for no additional cost, see the PRS-DMM
  • Programmable resistor with USB interface and Labview drivers
  • 5 year warranty
Add to Enquiry

ESI RS925D RESISTANCE DECADE

  • High accuracy – 20 ppm + 0.5 mΩ
  • High stability – 20 ppm + 0.5 mΩ
  • Resistance from 10 mΩ to 1.1 MΩ
  • 20 μΩ resolution
  • Precise fixed minimum resistance
  • Hermetically sealed, low inductance resistors
  • The first 4 decades can be individually trimmed for increase accuracy
Add to Enquiry

ESI / TEGAM DB62 DECADE RESISTOR

  • Precision accuracy of ±(0.01% + 2 mΩ)
  • Resistance range from 0.01 Ω to 11.1111 MΩ
  • 4 models available, each covering six decades
  • High-performance solid silver-alloy contacts
  • Low zero resistance < 6mΩ
Add to Enquiry

ESI SR1050 SERIES 1M & 10 M RESISTANCE TRANSFER STANDARD

  • Resistance Values 1 MΩ & 10 MΩ
  • Initial Accuracy… ± 25 or 30 ppm of nominal value matched within 10 ppm
  • Transfer Accuracy… ± 2 ppm (Typical Short-term Repeatability)
  • Calibration Accuracy… ± 10 or 15 ppm
Add to Enquiry

ESI SR1010 RESISTANCE TRANSFER STANDARD

  • Resistance Transfer Standards available in the following values 1 Ω, 10 Ω, 100 Ω, 1 kΩ, 10 kΩ, 100 kΩ
  • Initial Accuracy… ± 20PPM of nominal value matched within 10PPM
  • Transfer Accuracy… ± (1PPM + 0.1uΩ at parallel value) for 100:1
  • Transfer Accuracy… ± (1PPM + 1uΩ at series parallel value) for 10:1
  • Long Term Accuracy… ± 50PPM of nominal value
  • Calibration Accuracy… ± 10PPM
Add to Enquiry

PRS-200 SERIES PROGRAMMABLE RESISTANCE DECADE BOX

  • IEEE, RS232 or Ethernet Programmable Decade Resistor
  • Wide range and resolution: 100 mΩ to 100 M&Omega with 1 mΩ resolution
  • Available at accuracies of : 0.01%, 0.02%, 0.05%, 0.1%, 0.5%, and 1%
  • Special RTD and custom configurations
  • Dual / Combo rackmount models ( examples: Resistance & Capacitance or Resistance & Inductance)
Add to Enquiry

ESI SR1030 SERIES OIL IMMERSED TRANSFER STANDARD

  • Resistance Values of 1 Ω – 100 kΩ
  • Initial Accuracy… ± 20 PPM of nominal value matched within 10 PPM
  • Transfer Accuracy… ± (1 PPM + 0.1uΩ at parallel value) for 100:1
  • Long Term Accuracy… ± 50 PPM of nominal value
  • Calibration Accuracy… ± 10 PPM
Add to Enquiry

RTD SERIES – PRECISION RTD SIMULATOR

  • Highest accuracy, highest stability, lowest TC of any RTD Simulator available
  • Accuracy for Z Series: 0.005% (0.012 ºC for PT 100)
  • Resolution: 1 mΩ (0.0025 ºC for PT 100)
  • Stability 0.0002% for 24 hours; 0.001% for 12 months
Add to Enquiry