Description
MIPI Signal Module Model A040209
A040209 MIPI Signal ModuleA040209 MIPI Signal ModuleA040209 MIPI Signal Module
Key Features:
Signal complies to the MIPI DSI v1.2 / MIPI D-PHY v1.1 specifications and standards
Supports 1, 2, 4, 8 lane MIPI output
Lane rate: 1.5Gbps
Configurable to 565, 666, 888 pixel format
Equipped with ESD protection devices for output
Introduction:
A040209 is a MIPI signal module board and complies with the MIPI DSI v1.2 / MIPI D-PHY v1.1 signal specifications and standards. A040209 is used with the FPD Tester and can be applied to MIPI Display testing, providing MIPI Panel standard signals and other related controls.
eDP 1.4 Signal Module Model A040205
A040205 eDP 1.4 Signal ModuleA040205 eDP 1.4 Signal ModuleA040205 eDP 1.4 Signal Module
Key Features:
Compliant with eDP 1.4 standard
Support 1, 2, 4, 8 lane eDP output
Support eDP v1.4 with 7 Lane rates (1.62Gbps, 2.16Gbps, 2.43Gbps, 2.7Gbps, 3.24Gbps, 4.32Gbps, 5.4Gbps) defined
Support Manual / Auto Training mode
Support Pre-emphasis settings (0dB, 3.5dB, 6dB, 9.5dB)
Support Swing level (200mv, 250mV, 300mV, 350mV, 400mV, 450mV, 600mV, 800mV, 1000mV)
Able to set 6, 8, 10 bits
VDD provides over voltage/over current protection
Support 2 separate AUX and HPD channels
Equipped with ESD protective components for output
Introduction:
The A040205 is an eDP 5.4G signal module that is compliant with the eDP 1.4 standard for advanced eDP testing when working with the FPD Tester. The signal module provides standard signals and related controls for eDP Panel.
V-By-One Signal Module Model A040204
A040204 V-By-One Signal ModuleA040204 V-By-One Signal ModuleA040204 V-By-One Signal Module
Key Features:
Able to set 6, 8, 10 bits
Able to set 4, 8, 16 Lane channels per UUT’s requirements
Lane rate: 3.75Gbps
Data Mapping:
4 Lane: Non-Division (4 Lane *1)
8 Lane: 2 Division (4 Lane * 2)
16 Lane: Non-Division (16 Lane *1), 2 Division (8 Lane *2), 4 Division (4 Lane *4), 8 Division (2 Lane *8)
Introduction:
The A040204 is a V-by-One signal module that can work with FPD Tester for V-by-One testing. It provides standard signals and related control for V-by-One Panel.
Related Products
LTPS Display Shorting Bar Pattern Generator Model 58167
- Pattern generator for E-paper or LTPS panels
- 36 channels output
- Auto discharge function
LCM Tester Model 27011
- LVDS 2ch up to 162MHz
- TTL (Optional) signals output
- 12V, 5V output for Vbl
- 12V, 5V, 3.3V output for Vdd
LCM Tester Model 27012
- LVDS 2ch up to 162MHz
- TTL (Optional) signals output
- 24V, 12V, 5V output for Vbl
- 12V, 5V, 3.3V output for Vdd
LCM Tester Model 27013
- LVDS 4ch up to 330MHz
- Vdd output 3.3~13V/3.5A programmable
- Vbl by pass outside DC source
- EDID Read, Write, Compare
Multi-Channel Power Module Model 67394
- OCP/OVP/UCP/UVP protection mechanism
- High efficiency and high power density
- Maximum 3 adjustable powers for…
Flicker Measuring Probe for LCM ATS Model A712306
- Able to integrate with LCM ATS for LCM auto flicker adjustment
- Capable of integrating Chroma 29XX Series LCM Auto Test System
- Support FMA and FLVL flicker
FPD Tester Signal Module Model A040201-02-03-07
- A040201 MIPI + eDP Signal Module
- A040202 MIPI Signal Module
- A040203 eDP Signal Module
- A040207 LVDS Output Module
FPD Tester Model 27014
- Modular Interface Design
- eDP1.4 Signal Module
- Highly Accurate Programmable Power
- EDID / Scrolling Pattern / Bitmap File Pattern