Description
Test Fixture/Model 3250 3252 3302 3312
A132547 4-4mm Test Fixture ✔ ✔ ✔ ✔
A132572 3.5/4mm Test Fixture ✔ ✔ ✔ ✔
A132573 3.2/3.5mm Test Fixture ✔ ✔ ✔ ✔
A132579 7.5-5mm Test Fixture ✔ ✔ ✔ ✔
A132583 3.0-3.0mm Test Fixture ✔ ✔ ✔ ✔
A132584 3.5-3.5mm Test Fixture ✔ ✔ ✔ ✔
A132585 3.8-3.8mm Test Fixture ✔ ✔ ✔ ✔
A132586 3.0-4.0mm Test Fixture ✔ ✔ ✔ ✔
Related Products
RF LCR METER MODEL 11090-030
- Wide range of test frequencies: 100kHz~300MHz
- Fast measurement speed: 0.5 (ms)
- Various functions:
– Calibration/compensation status guidance
– Contact check for magnetic components through Rdc
– Multi-parameter comparison and bin-sorting
– Multi-point (~401 points) test and curve drawing
– Clear and guided operation - Fast-operating SMD test fixture (patent TW M621845 / CN 216013502U)
Milliohm Meter Model 16502
- Test signal: DC / pulsed
- Basic accuracy: 0.05%
- Measurement time: 65ms
- Standard RS-232 I/F, optional GPIB & Handler I/F
Milliohm Meter Model 16502
- Test signal: DC / pulsed
- Basic accuracy: 0.05%
- Measurement time: 65ms
- Standard RS-232 I/F, optional GPIB & Handler I/F
Capacitor Leakage Current/IR Meter (CLC/IR Meter) Model 11200
- DC voltage: 1.0V~650V / 800V
- Charge current: 0.5mA~500mA
- Leakage current measurement: 0.001uA~20.00mA
- Standard RS-232 I/F, optional GPIB & Handler I/F
Capacitor Test System Model 1820
- High frequency sine wave current: 1kHz~20kHz, 10kHz~200kHz
- DC bias voltage: 5000V max.
- Capacitor endurance & temperature rising test
Battery Cell Insulation Tester Model 11210
- Test voltage: up to 1KV(dc)
- Charge current: 50mA max.
- Wide range of Leakage Current (LC) measurement (10pA ~ 20mA)
- Automatic test with sequence: charge-dwell-measure-discharge
Electrical Double Layer Capacitor ATS (EDLC ATS) Model 8801
- Measurement function: C, IR, and ESR
- 10ch scanner for reducing test time
- Windows based software with open architecture
Component Test Scanner Model 13001
- Optional 40ch scan module and slave unit
- Support 8 slots for module plug-in, up to 320ch per unit
- Support 8 slave unit for connecting to master unit
- Standard RS-232, GPIB, and USB I/F