Automatic Transformer Tester Model 13350

Key Features

  • Compensation for individual channel
  • Combine measurement unit with scanbox to reduce measurement errors
  • USB storage interface
  • 10-100 LAN/ USB-H interface (option)
  • Built-in programmable 100mA bias current (RJ-45)
  • Test frequency, voltage and speed set separately
  • Fail Lock function
  • Auto Test function
  • Equipped with external standard test on 20ch scan test unit
  • Reduce the short-circuit loss in secondary side for leakage (Lk) test (A133502 20ch scan unit)
  • Short-circuit pin selectable for every test item
  • Multiple language: English & Simplified Chinese
  • RS232 interface compatible SCPI commands

Description

  • Test frequency 20Hz~200kHz / 20Hz~1MHz
  • Turn Ratio, Phase, L, Q, Lk, ACR, DCR, Cp, Pin short, Balance
  • Basic accuracy: 0.1%
  • Three different output impedance modes
  • Scan unit/box including:
    • 20ch scan test unit
    • 80ch scan box
    • C.T. test fixture

Acquired from many years of marketing experiences and cumulative results, Chroma 13350 is the newest generation of Automatic Transformer Tester that not only retains the merits of old 3250 model but also has many new functions including the combination of measurement unit and scan box to reduce measurement error caused by long wire, C.T. test fixture and 80/20 channels scan box support, USB interface for test conditions back-up, LAN communication interface, separate setting of test frequency/voltage/speed, Fail Lock function and Auto Test. It solves the performance and quality problems as well as human errors occurred on production line for the transformer industry today.

For ins tance: To reduce human er ror s on production line, the13350 Fail Lock function is able to lock the defect DUT (Device Under Test) when the test is done to prevent it from flowing out accidently. In order to cut down the time for placement, the 13350 Auto Test function can conduct test directly without pressing the trigger key. In addition, the 13350 adopts the design of dual CPU to increase the test speed by processing the measurement and display units simultaneously.

The compensation function of 13350 can do OPEN/SHORT for individual channel to solve the errors due to different layout on various fixtures.

13350 provides 20Hz~200kHz / 20Hz~1MHz test frequency and scan test items to cover low voltage test parameters for various transformers including Inductance (L), Leakage (Lk) , Turn-Ratio, DC Resistance (DCR), Impedance (Z), Stray Capacity (C), Quality Factor (Q), Equivalent Series Resistance (ESR), Pin Short (PS), Winding Phase (PH) and Balance.

Related Products

Milliohm Meter Model 16502

  • Test signal: DC / pulsed
  • Basic accuracy: 0.05%
  • Measurement time: 65ms
  • Standard RS-232 I/F, optional GPIB & Handler I/F

Milliohm Meter Model 16502

  • Test signal: DC / pulsed
  • Basic accuracy: 0.05%
  • Measurement time: 65ms
  • Standard RS-232 I/F, optional GPIB & Handler I/F

Capacitor Leakage Current/IR Meter (CLC/IR Meter) Model 11200

  • DC voltage: 1.0V~650V / 800V
  • Charge current: 0.5mA~500mA
  • Leakage current measurement: 0.001uA~20.00mA
  • Standard RS-232 I/F, optional GPIB & Handler I/F

Capacitor Test System Model 1820

  • High frequency sine wave current: 1kHz~20kHz, 10kHz~200kHz
  • DC bias voltage: 5000V max.
  • Capacitor endurance & temperature rising test

Battery Cell Insulation Tester Model 11210

  • Test voltage: up to 1KV(dc)
  • Charge current: 50mA max.
  • Wide range of Leakage Current (LC) measurement (10pA ~ 20mA)
  • Automatic test with sequence: charge-dwell-measure-discharge

Electrical Double Layer Capacitor ATS (EDLC ATS) Model 8801

  • Measurement function: C, IR, and ESR
  • 10ch scanner for reducing test time
  • Windows based software with open architecture

Component Test Scanner Model 13001

  • Optional 40ch scan module and slave unit
  • Support 8 slots for module plug-in, up to 320ch per unit
  • Support 8 slave unit for connecting to master unit
  • Standard RS-232, GPIB, and USB I/F

Programmable HF AC Tester Model 11802/11803/11805/11890/11891

  • Test frequency: 20kHz~200kHz (11802/11890/11891) / 10kHz~200kHz (11805) / 20kHz~1MHz (11803)
  • Maximum output power: 500VA (11802/11890/11891) / 800VA (11803) / 1kVA (11805)
  • Optional voltage / current step-up modules
  • Standard RS-485 I/F