RCS SERIES RESISTANCE & CAPACITANCE BOX

Quanlity:

Add to Enquiry

Data Sheet

Key Features

Combination of resistance and capacitance decades
Accurate 0.1% to 4% (depending on model)
Capacitance range 100 pF – 100 µF
Resistance range 1 Ω – 10 MΩ
Compact, convenient, and rugged

Now includes a NIST traceable calibration certificate
Direct reading and easy to use
Color coded switches
Two models available RCS-500 and RCS-502, RCS-502 has improved accuracy

Description

The RCS-box combines the features and specifications of both the R-box and the C-box in one convenient package. Ideal for trimming of timers, oscillators, and filters, the resistance and capacitance may be used independently, in series, or in parallel. A shorting link allows them to be coupled or separated.

One nice feature of the RCS Series is that it uses convenient side by side, color coded thumbwheel switches, that allow for direct reading — There is no fumbling with multiple slide or rotary switches. Simply dial in the desired values and use!

Made of high impact plastic and weighing less than a pound, these decade boxes are very portable and can reduce clutter on a busy lab bench.

Related Products

PRS-300 PRECISION PROGRAMMABLE RESISTANCE DECADE

Resistance Range: 0.1 Ω to 20 MΩ
Precision Lab Grade Accuracy 70 ppm + 1 mΩ
Resolution: 1 μΩ ( 0.000 001 Ω) or 6 digits
To further improve accuracy to <20 ppm, for no additional cost, see the PRS-DMM
Programmable resistor with USB interface and Labview drivers
5 year warranty

HPRS-HIPOT-LOAD (FLUKE 5320A-LOAD HIPOT REPLACEMENT) HIPOT CURRENT CALIBRATION LOAD RESISTORS

8 Resistances from 10 kΩ to 5 MΩ standard
Standard accuracy: ±10% at 23°C
Power rating : up to 300 W at 100 kΩ
Voltage rating: 1,400 to 5,500 V depending upon resistance value
Continuous operation at rated power
Kel-F washers on all terminals for low leakage current and high dielectric strength
Custom values available for AR and QuadTech/Chroma hipot testers

ESI RS925D RESISTANCE DECADE

High accuracy – 20 ppm + 0.5 mΩ
High stability – 20 ppm + 0.5 mΩ
Resistance from 10 mΩ to 1.1 MΩ
20 μΩ resolution
Precise fixed minimum resistance
Hermetically sealed, low inductance resistors
The first 4 decades can be individually trimmed for increase accuracy

ESI / TEGAM DB62 DECADE RESISTOR

Precision accuracy of ±(0.01% + 2 mΩ)
Resistance range from 0.01 Ω to 11.1111 MΩ
4 models available, each covering six decades
High-performance solid silver-alloy contacts
Low zero resistance < 6mΩ

ESI SR1050 SERIES 1M & 10 M RESISTANCE TRANSFER STANDARD

Resistance Values 1 MΩ & 10 MΩ
Initial Accuracy… ± 25 or 30 ppm of nominal value matched within 10 ppm
Transfer Accuracy… ± 2 ppm (Typical Short-term Repeatability)
Calibration Accuracy… ± 10 or 15 ppm

ESI SR1010 RESISTANCE TRANSFER STANDARD

Resistance Transfer Standards available in the following values 1 Ω, 10 Ω, 100 Ω, 1 kΩ, 10 kΩ, 100 kΩ
Initial Accuracy… ± 20PPM of nominal value matched within 10PPM
Transfer Accuracy… ± (1PPM + 0.1uΩ at parallel value) for 100:1
Transfer Accuracy… ± (1PPM + 1uΩ at series parallel value) for 10:1
Long Term Accuracy… ± 50PPM of nominal value
Calibration Accuracy… ± 10PPM

PRS-200 SERIES PROGRAMMABLE RESISTANCE DECADE BOX

IEEE, RS232 or Ethernet Programmable Decade Resistor
Wide range and resolution: 100 mΩ to 100 M&Omega with 1 mΩ resolution
Available at accuracies of : 0.01%, 0.02%, 0.05%, 0.1%, 0.5%, and 1%
Special RTD and custom configurations
Dual / Combo rackmount models ( examples: Resistance & Capacitance or Resistance & Inductance)

ESI SR1030 SERIES OIL IMMERSED TRANSFER STANDARD

Resistance Values of 1 Ω – 100 kΩ
Initial Accuracy… ± 20 PPM of nominal value matched within 10 PPM
Transfer Accuracy… ± (1 PPM + 0.1uΩ at parallel value) for 100:1
Long Term Accuracy… ± 50 PPM of nominal value
Calibration Accuracy… ± 10 PPM