Electrical Safety Analyzer Model 19032/19032-P

Key Features

  • Floating Output Design meet EN50191 (19032-P)
  • 500VA Power Rating (19032-P)
  • Five instruments in one: AC Hipot, DC Hipot, Insulation Resistance, Ground Bond and Leakage Current (Option)
  • Twin-PortTM function (Patent)
  • Programmable output voltage to 5kV AC and 6kV DC
  • Insulation resistance to 50GΩ/1000V DC
  • Ground bond up to 30A (Option up to 40A / 60A)
  • Open/Short check (OSC)
  • ARC detection (Flashover)
  • Password Protected front panel lockout
  • Storage of 50 Tests Setups with 100 Steps per setup
  • Optional dynamic leakage current auto scanning (A190305/A190306/A190307/A190308)
  • Standard RS-232 Interface
  • Standard GB Offset KIT, SCANNER Interface
  • Optional GPIB Interface
  • Optional Bar-code Scanner
  • Optional EST software for test programming, data mining, statistic
  • UL, TüV, CE mark (Model 19032)
  • CE mark (Model 19032-P)

A190308

  • Plug in to 19032 for Hipot, Line Leakage Auto Scan
  • Five Different Kinds Human Body RC Network
  • Four measurements mode: Normal, Reverse, Single Fault Normal, Single Fault Reverse
  • Up to 20A Line Input Current Capability
  • Build in A/D and Calibration Data Memory Easy to Install
  • Multiple Display Mode Voltage-LC, Amp-LC, VA-LC
  • Earth LC, Enclosure LC, Patient LC and Patient Auxiliary LC Test

Description

The 19032/19032-P are 5 in 1 Production Safety Analyzer. It can perform AC/DC Hipot, insulation resistance, grounding resistance and dynamic leakage current 5 safety test functions for electronic products. The dynamic leakage current scan device (A190305/A190307) can be connected externally or built in to 19032 Series. It is capable of measuring the complicate safety requirements with easy installation and operation, and is the finest auto safety tester to increase production test efficiency.

Model 19032/19032-P have Twin-PortTM and OSC function to minimize the test time greatly; along with the super large screen display and intelligent operation mode, 19032 is the most powerful single unit for auto safety tester.

Related Products

PV Inverter ATS Model 8000

  • High performance hardware device and software architecture
  • Meets IEEE1547, 1547.1, UL1741, GB/T 19939, NB/T 32004, CGC/GF004/GF035 preliminary test

Regenerative Grid Simulator Model 61830/61845/61860/61800-100

  • Output power rating: 30kVA~60kVA max. 300kVA (Parallel connect up to 5 units)
  • Three phase output voltage 0~300V/30Hz~100Hz

Digital Power Meter Model 66203/66204

  • Provides 0.1% FS measurement accuracy
  • Three phase measurement application
  • Voltage range: 15Vrms~600Vrms (6…

AC and DC Electronic Load Model 63800 Series

  • Power rating: 1800W, 3600W, 4500W
  • Parallel/3-Phase function (AC mode only)
  • Constant & Rectified load modes for AC loading

Solar Array Simulator Model 62000H-S Series

  • High-voltage 1800V for string PV inverter test solution
  • 5kW/10kW/15kW/18kW up to 1MW
  • Fast Transient Response Solar Array Simulation