Battery Simulator Soft Panel Model A170202

Add to Enquiry

Key Features

  • Multichannel battery packs state simulation.
  • Follow the battery cell curve behavior to simulate battery state.
  • Able to set frequently used parameters for battery pack and rapidly customize initial output state.
  • Regenerative battery energy discharge function, power saving, environment-friendly and low heat output with 85% efficiency.
  • Up to 60 channels can be paralleled for large current request.
  • Operating mode: Constant Current/Constant Voltage/Constant Power discharge
    • 600W, 1.25kW, 2.5kW, 5kW,10kW, 20kW, 30kW, 50kW, 60kW power per channel
    • 20V, 60V, 100V, 200V and 500V voltage modules
    • 2600A maximum current (paralleled)
  • Dynamic current charge and discharge simulation.
  • Highly accurate current and voltage measurement.
  • Smooth and rapid current charge and discharge switching without interruption.
  • Current smooth without surge when altering charge and discharge mode (CC-CV-CP).
  • Independent channel protection function.

Description

Who will need a battery simulator?

For the products developed to connect batteries for use, if the battery is not ready or unable to be provided due to high cost, the 17020 battery simulator can be used to confirming the product functions during development. The applications of battery simulator include motor drives within the car system, OBC, D-D convertor or charger within the CSS system and products of DC bus, etc.

Car System

CSS System Structure (Standalone – DC Bus)

How to select the battery simulator or DC power sypply and DC load integrated solution?

The integrated solution of DC power supply and DC load can also form a battery simulator; however, the difference between it and the bidirectional power supply is if there is delay during conversion. It is suggested to use the 17020 to test the bidirectional products, and use the 17020 or DC power supply and DC load integrated solution for testing the unidirectional products.

17020 DC Source/DC Load
Power Rating >20kW <20kW
Voltage Rating 20V, 60V, 100V, 200V, 500V Source: 30V, 40V, 80V, 100V, 300V, 450V, 600V,1000V
Load: 150V, 600V, 1200V
V Ripple Noise (rms) <1%FS (Base on Voltage Range) 8mV~1500mV (Base on Voltage Range)
I Ripple Noise (rms) <1%FS (Base on Current Range) 10 mA~270mA (Base on Current Range)
Interrupt During Current Transition W/O Interrupt Interrupt During Charge / Discharge Switch
Battery Simulator Software Ready by Chroma Create by User
Multi-UUT Max 8 Channels / Min 1 Channels 1 Channels
Dual-Output 2 DC Output per-channel 1 DC Output per-channel

Related Products

Battery Simulator Model 17020/17040

  • Multichannel battery packs state simulation
  • Ability to follow the battery cell curve behavior to simulate battery state
  • Ability to set frequently used parameters for battery pack and rapidly customize initial output state
  • Allows for smooth and rapid current charge and discharge switching without interruption for bidirectional components
Add to Enquiry